Customizing Your Device
October 21, 2003 T-Mobile Sidekick Owner’s Manual 48
Select and Edit Sound Profiles
1 From the Jump screen, press Menu then select Settings > Sound Profiles to open the Sound Profiles
screen.
2 In the Sound profile currently active group box of the screen, you can see which profile is currently active.
To the right of and just below the profile name, the attributes of the profile are represented by icons:
3 To select a different profile, highlight the Sound Profile pop-up menu (it is highlighted in the example above)
then press the wheel to open the pop-up menu. Rotate the wheel and highlight the profile you want, then
press the wheel to select it.
To add a new profile, open the Sound Profile pop-up menu and select New Profile. The edit profile screen
will open. By default, all profile attributes are selected and the volume for all sounds is set to 100%. Make
your edits just as you would an existing profile.
4 To edit the profiles’ attributes, select the Edit button. The profile edit screen will open:
5 Select the profile you want to edit from the pop-up menu (highlighted in the illustration above). You can
change the following profile attributes:
• Name text box - Type the name you want to assign the profile.
• Flash Wheel check box - Select if you want to accompany your ringtone with a flashing wheel (note that
this only works if the ringtone you select has a flashing component).
• Vibrate check box - Select if you want the device to vibrate whenever a ringtone plays.
• Volume sliders - For each type of sound, you can adjust the volume. Highlight the sound type then press
the wheel to open the slider:
Rotate the wheel up to increase the sound; rotate the wheel down to decrease the sound. Press the
wheel to set the volume and close the slider.
To Next Page
Loading...
Need help?
General
