6 – Modules
MODULE (GATE/EXPANDER/DE-ESSER)
screens
GATE, EXPANDER and DE-ESSER settings can be made on the
MODULE (GATE), MODULE (EXPANDER) and MODULE (DE-ESSER)
screens for the CH 1–40 modules.
Tap the GATE/EXPANDER/DE-ESSER areas for each module on
the Home Screen to open these screens.
1 INPUT level meter
This shows the signal level input to the GATE/EXPANDER/DE-
ESSER.
2 Dynamics input/output characteristics graph
This shows a graph of the GATE/EXPANDER input/output
response or of the DE-ESSER EQ frequency response.
3 Gain reduction meter
This meter shows the amount of gain reduction from the
GATE/EXPANDER/DE-ESSER.
4 OUTPUT level meter
This shows the signal level output from the GATE/EXPANDER/
DE-ESSER.
5
GATE/EXPANDER/DE-ESSER ON/OFF button
o Tap this button to turn the dynamics effect on/off.
(Default: OFF)
o When on, this button, the dynamics input/output
response graph and parameters will appear highlighted.
o When off, a large “OFF” will appear in the top left of the
dynamics input/output response graph area (2).
6 LIBRARY button
Tap this button to open the GATE/EXPANDER/DE-ESSER
LIBRARY Screen. (See “Various LIBRARY Screens” on page
176.)
7 Dynamics Parameters
These show GATE/EXPANDER/DE-ESSER parameters and can
be used to adjust them.
Use the LCD knobs that correspond to the parameters to
adjust their values.
8 DYNAMIC TYPE button
o This shows the name of the currently selected dynamics
type.
o Tap this button to open the type selection menu.
Options: GATE (default), EXPANDER, DE-ESSER
132 TASCAM Sonicview 16/Sonicview 24 V1.1.0
To Next Page
Loading...
