Tascam Sonicview 16 User Manual

7 – Other module parameter setting screens
4 Module buttons
These are buttons for selecting modules assigned to the
selected DCA.
Tapping these buttons, highlighting them, will assign them
to the DCA.
NOTE
At the top right, the Mute Group assignment status is shown
in the top line and the DCA assignment status is shown in
the bottom line in the same way as in the NAME area on the
Home Screen. (See “q NAME area” on page 18.)
5 CLEAR ALL button
Tap this button to open a message confirming whether to
clear all INPUT and OUTPUT/DCA assignments to the selected
DCA.
Tap OK to clear all assignments.
Mute Group Assign page
1 MuteGrp buttons
Tap these buttons to select a Mute Group for changing
assignments.
The selected Mute Group button will be highlighted.
2 Snapshot Recall Safe button
Tap this button to enable the Snapshot Recall Safe function
for the selected Mute Group. (Default: off)
When this is on, the button will appear highlighted.
3 Module type selection pages
These are page buttons for module types assigned to the
Mute Group.
Buttons selected by tapping will be highlighted.
4 Module buttons
These are buttons for selecting modules assigned to the
selected Mute Group.
Tapping these buttons, highlighting them, will assign them
to the Mute Group.
NOTE
At the top right, the Mute Group assignment status is shown
in the top line and the DCA assignment status is shown in
the bottom line in the same way as in the NAME area on the
Home Screen. (See “q NAME area” on page 18.)
5 CLEAR ALL button
Tap this button to open a message confirming whether to
clear all INPUT and OUTPUT/DCA assignments to the selected
DCA.
Tap OK to clear all assignments.
TASCAM Sonicview 16/Sonicview 24 V1.1.0 159

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English