Tascam Sonicview 16 User Manual

8 – Saving and recalling setting data
MODULE RECALL SAFE screens
Use the following MODULE RECALL SAFE screens to select
parameters that will be protected (settings retained) when
module libraries are recalled.
o MODULE INPUT RECALL SAFE screen
o MODULE FX RTN RECALL SAFE screen
o MODULE OUTPUT RECALL SAFE screen
Tap the RECALL SAFE buttons on the corresponding module
library screens to open these screens.
NOTE
i Settings included in INPUT PARAMETERS on the MODULE
INPUT RECALL SAFE Screen
i PAD On/Off
i Phase
i D.Trim
i HPF Freq
i HPF On/Off
i The following parameters are not included in module
libraries.
i Analog Gain
i Analog Gain GANG On/Off
i Phantom On/Off
i Routing
All System Data screen
On this screen, settings for the entire mixer including all
snapshot and library data (“All System Data”) can be handled in
the following ways.
o All System Data can be saved as a file to the internal storage
o All System Data can be recalled from the internal storage
(and applied to the mixer)
o All System Data can be backed up (exported as a file) to an
SD card or USB flash drive
o All System Data can be restored (imported as a file) from an
SD card or USB flash drive to the internal storage
Tap Menu Screen > System Setup menu > All System Data to
open this screen.
1 List of saved files
This list shows All System Data Files that have been saved in
the internal storage.
The selected file is highlighted.
2 button
o This button only appears for the selected file.
o Tap this button to open a confirmation message for
deleting the All System Data file.
i Tap the CANCEL button to close the confirmation
message.
i Tapping the DELETE button will delete the selected All
System Data file from the internal storage and close the
confirmation message. The selected All System Data
file will be removed from the list of saved files (1).
TASCAM Sonicview 16/Sonicview 24 V1.1.0 179

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English