Tascam Sonicview 16 User Manual

8 – Saving and recalling setting data
SNAPSHOT RECALL SAFE screen
The following settings can be made on this screen.
o PARAMETER SAFE page
Use this to select parameters that will be protected (settings
retained) when snapshots are recalled.
o MODULE SAFE page
Use this to select modules that will be protected (settings
retained) when snapshots are recalled.
Tap the RECALL SAFE button on the Snapshot List Screen to
open this screen.
PARAMETER SAFE page
The recall safe function can be activated for specific groups of
settings on this page.
Tap checkboxes in rows to activate the recall safe function for
them.
Selected rows will have check marks (4) and be highlighted
light blue.
NOTE
i Settings included in INPUT/OSC PARAMETERS
Analog Gain
Analog Gain GANG On/Off
PAD On/Off
Phantom On/Off
Phase
D.Trim
HPF Freq
HPF On/Off
CH OSC INPUT
OSC On/Off
OSC Assign
OSC Level
OSC Type
OSC Freq
i Settings included in OTHER MODULE PARAMETERS
Gate/Expander/De-Esser Parameters
EQ Parameters
GEQ Parameters
Comp/Ducker Parameters
Module Delay Parameters
Fader
Mute
MAIN L/R Assign
PAN/BAL
PAN LINK
Image
Mode
Direct Out Parameters
Talkback Phantom On/Off
Talkback D.Trim
Metering Point
RTA On/Off
LCD Brightness
MODULE SAFE page
The recall safe function can be activated for modules on this
page.
Tap the buttons for modules to be selected for recall safe
protection.
Selected module buttons will be highlighted and have yellow
frames.
172 TASCAM Sonicview 16/Sonicview 24 V1.1.0

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English