Tascam Sonicview 16 User Manual

7 – Other module parameter setting screens
SENDS ON FADER function
o The SENDS ON FADER function enables controlling SEND
levels with faders.
o When in Sends On Fader mode, the SENDS ON FADER on the
top panel lights and the following operations are possible.
i Using channel faders to control SEND levels from each
module to buses subject to SENDS ON FADER operation
i Using the MASTER fader to control the FADER level
(bus master level) of buses subject to SENDS ON FADER
operation
i Using channel MUTE buttons to switch SEND ON/OFF to
buses subject to SENDS ON FADER operation from each
module (MUTE button lit: SEND OFF, MUTE button unlit:
SEND ON)
In addition, the MUTE, SOLO and SEL keys and the color bar in
the top panel master section will become operation keys and
displays for the bus subject to SENDS ON FADER operation.
The SEND indicator will also light and the L/R indicators will
become unlit.
o Sends On Fader mode can be activated and deactivated with
the following operations.
i Top panel SENDS ON FADER key
i USER KEY/FOOTSWITCH/GPIO-IN assigned to the Sends
On Fader function (See “USER DEFINED CONTROLS screen”
on page 42.)
NOTE
The Sends On Fader mode setting is assigned to the
following USER KEYS by default on the User Key page.
i USER KEY 5–12 (Sends On Fader Mix1–8)
SENDS ON FADER screen
Select the buses subject to SENDS ON FADER operation on this
screen
Press the SENDS ON FADER key on the top panel to open this
screen.
o Tap a bus selection button, highlighting it, to select that
bus. The channel faders will move to the positions of the
SEND levels from the modules to the selected buses. The
MASTER fader will move to the position of the FADER level of
the selected bus. The channel MUTE buttons will be lit/unlit
according to the SEND ON/OFF status to the selected bus of
each module (MUTE button lit: SEND OFF, MUTE button unlit:
SEND ON).
o To use SENDS ON FADER operation while, for example, the
Home Screen on the right touchscreen is open, tap the
icon at the top right of this screen to close it.
o Tapping the icon will close this window, but Sends On
Fader mode will remain active. Press the SENDS ON FADER
key to open the SENDS ON FADER Screen again.
o Press SENDS ON FADER key when the SENDS ON FADER
screen is open to end Sends On Fader mode. This will close
the SENDS ON FADER screen and return these items to their
normal display states: channel faders and mute buttons,
MASTER faders, master section MUTE, SOLO and SEL keys and
color bars, L/R SEND indicators and channel screens.
NOTE
This screen will not be shown for a MIX bus with BUS mode
set to GROUP.
148 TASCAM Sonicview 16/Sonicview 24 V1.1.0

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English