Brief Procedures
Test Equipment Required The test equipment listed
in
Table 5-1 is a complete list of the equipment
required to accomplish the adjustments in this section. Test equipment
specifications described are the minimum necessary to provide accurate
results.
5-2
Detailed operating instructions of the test equipment is not given
in
this
procedure. If more operating information is required, refer to
the
appropri-
ate test equipment instruction manual.
When you use equipment other than that recommended, you may have
to change the control settings of the test setup. If the exact example equip-
ment
in
Table 5-1 is not available, use the minimum specification column
to determine if any other available test equipment might suffice to perform
the check
or
adjustment.
Adjustment
To Next Page
Loading...
Need help?
General
