Tenda AC5 - Page 109

105
Router 1 accesses the internet and Router 2 the intranet. AC5 gets IP address to access the internet from
Router 1 automatically. Set static route on AC5, achieving LAN clients access both internet and intranet.
Assume that the devices have following MAC addresses:
 AC5 LAN IP Address: 192.168.0.1
 Router 1 LAN IP Address: 192.168.1.10
 Router 2 LAN IP Address: 192.168.1.20
Assume that the intranet has following information:
 Address: 172.16.105.10
 Subnet Mask: 255.255.255.0
Procedures:
Step 1 Set Router 1 to access the internet. For detailed steps, please refer to the installation guide of the
router.
Step 2 Set Router 2 to access the intranet and disable the DHCP function of this router. For detailed steps,
please refer to the installation guide of the router.
Step 3 Set AC5 to access the internet by dynamic IP address. For detailed steps, please refer to 5.3 Setting up
to an Internet Connection with a Dynamic IP Address in this guide.