147
Consult your ISP.
Q4. How to restore the router to factory settings if I cannot access the web UI of the router?
A4. Power on the router, and when the SYS indicator blinks, you can hold the WPS/Reset button down for 8
seconds and release. Reset succeeds when all indicators blink once. After the factory settings are restored,
configure the router again. The default login IP address of the router is 192.168.0.1.
Q5. If an IP address conflict message appears after the computer that has connected to the router starts, what
should I do?
A5. Try the following solutions:
Verify that there is no other DHCP server on your LAN or the other DHCP server is disabled.
Verify that the IP address of the computer is not used by another device on your LAN. The default
IP address of the router is 192.168.0.1.
Verify that the static IP addresses assigned to computers on your LAN are not used by other
devices.
Q6. If I forget the login password of the router. What should I do?
A6. Restore the router to factory settings, and try logging in again.
Method to restore the router to factory settings: Power on the router, and when the SYS indicator blinks, you
can hold the WPS/Reset button down for 8 seconds. Reset succeeds when all indicators blink once.
To Previous Page
Loading...
