6 Using the product
0970 4020 en 01 111
Pos: 147 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/00 Tabel len @ 0\mod_1188996635000 _79.doc @ 3555
6.5.2. Table view
The readings are listed in table form in this view.
In the Start | View menu, the Table command is activated. Now
you have to select the data record that you wish to display.
1. Select the day or time period in the calendar that should be
evaluated.
2. In the tree structure of the data range, open the zone that
contains the data to be displayed.
- The table view of the selected data is shown.
> If necessary, deactivate channels via the checkboxes for the
display.
Pos: 148 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/01 Mess werte markieren @ 0\mod_1188 996635625_79.doc @ 3565
6.5.2.1. Marking readings
Mark specific readings to perform a statistical computation for
part of the measurement series, for example.
1. Click on Edit | Tools | Mark.
- A dialogue for determining the criteria is shown.
To Next Page
Loading...
