7 Maintaining the product
132 0970 4020 en 01 testo AG
Pos: 175 /TD/Produ kt instand halten/te sto Saveris/02 Komponen ten hinzufügen @ 0\mod_1 188476503984_79.doc @ 2918
7.1.2. Adding components
1. Connecting new probes at the Saveris base; see
"Connecting radio probe".
2. Start up testo Saveris software.
- The software recognizes that a new probe is located in the
system and the wizard for the installation of a new
component is started.
3. Click on [Continue >].
- The
Commission new probe dialogue is shown.
To Next Page
Loading...
