7 Maintaining the product
0970 4020 en 01 131
3. Change to
Projects tab.
4. Click on [Log out component].
- The
Log out component dialogue is shown.
5. Activate the checkbox in front of the component that is to be
logged out of the system.
6. Click on [OK].
- A query to erase the components from the configuration is
shown.
7. Confirm the query with [Yes].
- The component is deleted from the configuration.
> After deleting a probe, briefly press the connect button on
the rear of the probe so that the probe no longer attempts to
send measurement data.
To Next Page
Loading...
