TESTO Saveris User Manual

6 Using the product
84 0970 4020 en 01 testo AG
Performing the test run".
After mounting the hardware, perform another check of
the system to test the proper function of the measuring
system.
You can thus recognize whether probes are located
outside of the range of the Saveris base, where
applicable, or the radio link is interfered with by
structural conditions.
Pos: 91 /TD/--- Seitenwechsel --- @ 0\mod_1173774430601_0.doc @ 283
Pos: 92 /TD/Übersc hriften/6. Produkt verwenden @ 0\mod_11737749 28554_79.doc @ 328
6 Using the product
Pos: 93 /TD/Produk t verwenden/testo Sa veris/01 Start/02_Bedi enoberfläche_01 @ 0\ mod_1189076833359_79. doc @ 3943
6.1. User interface
In this chapter, you learn how the user interface of the Saveris
software is designed.
Pos: 94 /TD/Produkt verwenden/testo Saveri s/01 Start/02_Bedienober fläche_02_SBE @ 1\ mod_1197983794406_79. doc @ 6583
Pos: 95 /TD/Produk t verwenden/testo Sa veris/01 Start/02_Bedi enoberfläche_03 @ 1\ mod_1197983802515_79. doc @ 6603
Menu bar
Menu Explanation

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery