TESTO Saveris User Manual

6 Using the product
98 0970 4020 en 01 testo AG
Designation Explanation
Delay (min) With a delay of how many measuring
cycles should the alarm be triggered?
Pos: 129 /TD/Produ kt verwenden/testo Sa veris/04 Alarme konf igurieren/02 Spezif ischer Alarm - 03 Ausgabe @ 0\ mod_1189064615828_7 9.doc @ 3891
Output targets
Designation Explanation
SMS,
E-mail,
Alarm relay base,
Determining in which form the probe
alarms should be issued.
The system alarms are above all used for pointing out
irregularities in the measurement system. If no reaction
follows the system alarms, uninterrupted data recording
is not guaranteed.
If a system alarm is issued via
SMS or E-mail time
delays may occur.
The notification function via
SMS is only available if the
Saveris base is equipped with a GSM module.
> Make the required entries.
When exiting the probe settings the changes are saved.
Pos: 130 /TD/Produ kt verwenden/testo Sa veris/04 Alarme konf igurieren/03 Alarmüber sicht @ 0\mod_118899 7883484_79.doc @ 3791
6.4.3. Alarm overview
In the alarm overview you will find a list of the probes with their
specific alarm settings.
1. Click on Alarm settings in the navigation area.
- In the data window, the
Basic setting and Alarm overview
submenus as well as the probes connected in the Saveris
base are shown.
2. Click on Alarm overview.
- The probes are listed with their specific settings in the
display range.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery