TESTO Saveris User Manual

4 Product description
0970 4020 en 01 23
4.3.3. Meaning of the LED displays at the probes
Connecting to the Saveris base
Hold the connect button on the rear of the probe until the LED
begins to flash orange.
Representation Explanation
Flashing orange
An attempt to establish the connection to
the Saveris base.
Lit up green
The connection to the Saveris base was
performed successfully.
Lit up red
The connection to the Saveris base
failed.
Status displays during operation
Briefly press the connect button on the rear of the probe once
and the LED shows the status of the connection to the Saveris
base.
Representation Explanation
Flashing 3 x green
A very good connection to the Saveris
base exists.
Flashing 2 x green
A good connection to the Saveris base
exists.
Flashing 1 x green
A borderline connection to the Saveris
base exists.
Flashing 3 x red No connection to the Saveris base exists.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery