5 First steps
0970 4020 en 01 41
Pos: 66 /TD/Erst e Schritte/testo Saver is/04 Hardware inbetri ebnehmen @ 0\mod_1188 478113640_79.doc @ 2982
5.10. Starting up hardware
The following preconditions must be fulfilled for the startup of
the hardware:
• the Saveris base is ready for operation,
• all probes are connected to the Saveris base and
• the Saveris software is installed on the computer.
1. Connect the Saveris base to the computer via the USB
cable.
- The startup assistant starts.
Under Windows 2000, you must manually call up the
assistant using
Start | All Programs | Testo | Startup
Assistant
.
2. Click on [Continue >].
- The general system settings of the Saveris base are shown.
To Next Page
Loading...
