6 Using the product
0970 4020 en 01 113
6.5.2.4. Compressing readings
Compress the table to definable intervals to maintain the clarity
of the table with large amounts of data.
Only the first and the last value are shown for the individual
intervals. The other readings are hidden.
In addition, the minimum, maximum and/or average value can
be shown for the respective time period.
1. Click on Edit | Tools | Compress.
- The dialogue for determining the options is opened.
> Use the checkboxes to determine whether the respective
minimum reading (
Min), maximum reading (Max) and/or
average value (
Mean) should be calculated for the individual
time spans.
At least one of these values must be activated to be
able to perform the compression of the table.
2. Enter the time span under Extract and determine its unit.
Possible settings for the unit:
•
sec (second)
•
min (minute)
•
h (hour)
•
d (day).
3. Click on [OK].
- The dialogue is closed and the table is shown compressed.
Pos: 152 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/05 Verdi chtung aufheben @ 0\mod_1 188996639140_79.doc @ 3605
To Next Page
Loading...
Need help?
General
