5 First steps
0970 4020 en 01 83
5. Place probe on the wall bracket until it engages.
Please refer to "Removing probe from wall bracket" for
removing the probe from the wall bracket.
Pos: 90 /TD/Erst e Schritte/testo Saver is/07 **** Montage der Hard ware/04 System prüf en @ 0\mod_1191327191562_7 9.doc @ 5362
5.14.4. Checking the measuring system again
> Perform another test run at the measuring system; see "
1
2
To Next Page
Loading...
