TESTO Saveris - Connecting Radio Probe

5 First steps
38 0970 4020 en 01 testo AG
Pos: 64 /TD/Erst e Schritte/testo Saver is/03 Fühler an der Base an melden @ 0\mod_1188478029 328_79.doc @ 2964
Integrating Sa veris router (optiona l) Page 52
5.8. Connecting radio probe
You can connect a maximum of 15 probes to the
Saveris base directly via radio.
In addition, you can operate 15 more probes at the
Saveris Base per converter and 5 per router.
Note that a maximum of 254 channels can be
processed by the Saveris software.
1. Change to the Info System menu at the Saveris base with
the
[▼] button.
2. Press [Enter] to call up the Login function.
- The status bar in the display shows that the Saveris base
is ready for probe detection.