TESTO Saveris User Manual

6 Using the product
0970 4020 en 01 125
2. Click on one of the probe names to open the information on
the probe.
- The settings of the selected radio probe are shown in the
display range.
Designation Explanation
Serial number
Serial number of the probe.
Firmware Version number of the probe's instrument
software.
Radio quality Field strength of the last radio link to the
Saveris base.
Meas. cycle Interval in which the measurements
should be performed.
Battery status
Charge level of the batteries in the probe.
Battery type Selection list for specifying the battery
type (
AlMn or Energizer)
Type
Specification of the probe type.
Pos: 167 /TD/Produ kt verwenden/testo Sa veris/09 Einstellu ngen System/04 Ether net probes @ 0\mod_1190896768 531_79.doc @ 5172
6.9.5. Ethernet probes
Using this menu item, you can, for example, check the version
of the instrument software or the IP address of an Ethernet
probe.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery