5 First steps
0970 4020 en 01 51
5.11. Starting Saveris software
Ensure that the Saveris software is not already open,
for example in multi-user operation under Windows
®
Vista.
1. Select [Start] | All Programs | Testo | Saveris.
- The
Testo Saveris software program window is opened
with the
Select project dialogue.
If the software will not start, check whether the
testo
tdassvcs
service is started in the service management
of the operating system and restart it, if needed.
2. Select the
•
Only active projects option if the data from a running
project should be opened
• All projects option if the data from a completed project
should be opened.
3. Select the project that is to be opened in the tree structure.
4. Confirm with
[OK].
- The
Testo Saveris software program window is shown with
the selected data record in the foreground.
Pos: 68 /TD/Erst e Schritte/testo Saver is/Hardware erwei tern/Messsystem erwei tern @ 1\mod_119755158 1796_79.doc @ 6327
To Next Page
Loading...
