TESTO Saveris User Manual

2 Safety and the environment
8
0970 4020 en 01 testo AG
Use
> Familiarity with a PC as well as the Microsoft products,
especially Microsoft Office 2007, is assumed in this
documentation.
> Please read this documentation through carefully and
familiarize yourself with the product before putting it to use.
Pay particular attention to the safety instructions and
warning advice in order to prevent injuries and damage to
the products.
> Keep this document to hand so that you can refer to it when
necessary.
> Hand this documentation on to any subsequent users of the
product.
Pos: 7 /TD/Übersc hriften/2.2 Sic herheit gewährleisten @ 0\m od_1173780783960_7 9.doc @ 366
2.2. Ensure safety
Pos: 8 /TD/Sic herheit und Umwelt/Sicher heit gewährleisten/S averis Wartungsar beiten @ 1\mod_11969586275 09_79.doc @ 6094
> Carry out only the maintenance and repair work on the
components of the testo Saveris system that is described in
the documentation. Follow the prescribed steps exactly. Use
only original spare parts from Testo.
Pos: 9 /TD/Sic herheit und Umwelt/Sicher heit gewährleisten/S averis spannungsf ührende Teile @ 1\mod_12049 07008625_79.doc @ 12630
> Never use the Saveris probes to measure on or near live
parts.
Pos: 10 /TD/Sic herheit und Umwelt/Sicher heit gewährleiste n/Produkt bestimmungs gemäß verwenden @ 0\mod_1173 781261848_79.doc @ 386
> Only operate the product properly, for its intended purpose
and within the parameters specified in the technical data. Do
not use any force.
Pos: 11 /TD/Sic herheit und Umwelt/Sicher heit gewährleiste n/Saveris Funk @ 1\mod_1198 149459718_79.doc @ 6845
> The output of the power supply for the Saveris probes,
routers, converters and the Saveris base is restricted in
accordance with EN 60950-1:2001. A manipulation of the
power supply is not allowed in terms of the radio
authorization.
> The radio module is installed in the Saveris components
such that the limit values for air and creepage distance is
adhered to with regard to the standards. Changing the
internal design of the components is not allowed.
> When selecting the location, ensure that the permissible
ambient and storage temperatures are adhered to:
• Radio module: -35 to 50°C
• Components: -35 to 50 °C (operation);
-40 to 55 °C (storage).

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery