6 Using the product
122 0970 4020 en 01 testo AG
Designation Explanation
Serial number
Serial number of the Saveris base.
Firmware Version number of the instrument
software in the Saveris base.
Date and time
Date and time of the Saveris base.
[Synchronize] Date and time from the operating system
are applied to the Saveris base.
IP address
IP address of the Saveris base.
Pos: 164 /TD/Produ kt verwenden/testo Sa veris/09 Einstellu ngen System/02 SMS-Mod ul @ 0\mod_118899790575 0_79.doc @ 3811
6.9.2. System settings for the GSM module
Using this menu item, you enter the data of the SIM card and
can determine whether the alarm messages are to be sent
again if the first attempt at sending them should fail.
To be able to use the notification function via SMS you
require a Saveris base with an integrated GSM module.
1. Open the Base entry.
- The submenu items
General, SMS module and Operating
data
are shown under the entry.
2. Click on
SMS module to open the settings for sending the
SMS messages.