TESTO Saveris - Configuring the Alarms

6 Using the product
0970 4020 en 01 95
Pos: 124 /TD/Produ kt verwenden/testo Sa veris/04 Alarme konf igurieren/00 Alarme konf igurieren @ 0\mod_1189 063396359_79.doc @ 3852
6.4. Configuring the alarms
The testo Saveris measurement system differentiates between
two types of alarm, which can be configured independent of
one another:
• System alarms, meaning alarms that come from the Saveris
base, the GSM modem or the relay at the Saveris base, and
• Probe alarms, which report a fault or that a limit value was
exceeded at a probe.
Pos: 125 /TD/Produ kt verwenden/testo Sa veris/04 Alarme konf igurieren/01 Alarm vor konfigurieren @ 0\ mod_1188997882750_79. doc @ 3781
6.4.1. Basic settings for the SMS messages
The
Basic settings submenu is only shown if the
Saveris base is equipped with a GSM module.
1. Click on Alarm settings in the navigation area.
- In the data window, the
Basic setting and Alarm overview
submenus as well as the probes connected in the Saveris
base are shown.
2. Click on Basic setting.
- The basic settings for the alarm messages via SMS are
shown in the display range.
Designation Description