6 Using the product
112 0970 4020 en 01 testo AG
2. Select the
• Select
Date/time if the readings for a particular time
period are to be marked.
- The selection lists are enabled for the determination of
the time period.
• Select the
Index range if the readings in particular rows
in the table are to be marked.
- The selection lists are enabled for the determination of
the index range.
3. Determine time period or index range.
4. Click on
[OK].
- The dialogue is closed and the corresponding readings are
marked in the table.
You can also mark readings with the mouse, as you are
familiar with from Office applications.
Pos: 149 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/02 Markier ung aufheben @ 0\mod_1188 996637078_79.doc @ 3575
6.5.2.2. Dropping the marking
> Click on Edit | Tools | Drop marking.
- The marking of the readings is deleted.
Pos: 150 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/03 E xtremwert o der Mittelwert einfüg en @ 0\mod_11889966378 90_79.doc @ 3585
6.5.2.3. Inserting extreme values or mean in the table
Insert the minimum/maximum reading as well as the mean from
the whole table at the end of the table.
1. Click on
Edit | Tools | Extra lines | Minimum, Maximum or
Mean value.
- A row with the corresponding value for all readings is
inserted at the end of the table.
> Repeat step 1 to insert another value in the table.
To erase a value from the table again, click in the
Extra
lines
menu again on the corresponding entry.
Pos: 151 /TD/Produ kt verwenden/testo Sa veris/05b Tabellen a nalysieren/04 Verdi chten @ 0\mod_1188996638 437_79.doc @ 3595