TESTO Saveris - Installing Saveris software

5 First steps
50 0970 4020 en 01 testo AG
29. Click on
•
[Yes] if the settings should be shown in the Internet
browser and printed from there.
•
[No] if the settings should not be shown.
The dialogue for the conclusion of the startup is shown.
30. Consecutively press the connect button on all probes to
synchronize the probes.
31. Close the dialogue with
[OK].
- The hardware is now ready for operation.
Pos: 67 /TD/Produk t verwenden/testo Sa veris/01 Start/01_Sa veris-Software star ten @ 0\mod_118907683 2593_79.doc @ 3933