TESTO Saveris User Manual

5 First steps
0970 4020 en 01 49
26. Click on [Continue >].
- The wizard is shown with the information on the start of
measurement and the list of the registered probes.
27. Postpone the start of measurement, if necessary.
> Change the project name in the Name field.
Consider a clear-cut name for the project that you will
be able to easily associate later.
The project name cannot subsequently be changed.
28. Click on [Finish] to complete the startup of the hardware.
- A dialogue for displaying and printing the configuration
settings is shown.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery