TESTO Saveris User Manual

3 Specifications
0970 4020 en 01 11
transmits these measurement data to the base via Ethernet
cable. In addition the so-called Ethernet probes can be
connected to the base using an Ethernet cable.
With the testo Saveris software you thereby always have an
overview of the development of the readings in the individual
areas.
Pos: 21 /TD/Leis tungsbeschreibung/ Verwendung/testo Sa veris/04 Haftungsau sschluss @ 1\mod_11973 76616906_79.doc @ 6214
Exclusion of liability
The testo Saveris system was developed to consolidate a large
amount of measurement data from spatially separated probes in
the Saveris software, document it without interruption and issue
alarms in the event of irregularities.
The testo Saveris system is not designed to undertake control
and regulation tasks according to the regulations. Particularly
the alarms are not to be perceived as so-called critical alarms
with which the endangerment of life or limb or damage to
equipment can be averted.
Liability on the part of Testo AG for damages from this type of
application is excluded.
Pos: 22 /TD/Übersc hriften/3.2 Syste mvoraussetzungen @ 0\ mod_1187269645125_79. doc @ 2385

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery