5 First steps
56 0970 4020 en 01 testo AG
8. Place housing cover on the router.
9. Screw on housing cover .
10. Insert protection caps .
The wall mounting of a router is performed in the same
ways as for a probe; see "Mounting the probe on the
wall".
Pos: 72 /TD/Erst e Schritte/testo Saver is/Hardware erwei tern/01 Router einbinden/ 02 Router anmelden @ 1\ mod_1197548238578_79. doc @ 6274
2
1
3
To Next Page
Loading...
