Texas Instruments CC2541EMK User Manual

www.ti.com Registers
RFIRQM1 (0x6182) – RF Interrupt Masks
Bit
Name Reset R/W Description
No.
7
PINGRSP
0 R/W When receiving a CMD_PING command, the LLE responds with a
PINGRSP. This can be used for checking that the LLE is running.
0: Interrupt disabled
1: Interrupt enabled
6
TASKDONE
0 R/W Task ended
0: Interrupt disabled
1: Interrupt enabled
5
TXDONE
0 R/W Packet transmitted
0: Interrupt disabled
1: Interrupt enabled
4
RXEMPTY
0 R/W Empty packet received
0: Interrupt disabled
1: Interrupt enabled
3
RXIGNORED
0 R/W Packet received with unexpected sequence number
0: Interrupt disabled
1: Interrupt enabled
2
RXNOK
0 R/W Packet received with CRC error
0: Interrupt disabled
1: Interrupt enabled
1
TXFLUSHED
0 R/W Tx ACK buffer flushed
0: Interrupt disabled
1: Interrupt enabled
0
RXOK
0 R/W Packet received correctly
0: Interrupt disabled
1: Interrupt enabled
RFERRM (0x6183) – RF Error Interrupt Masks
Bit
Name Reset R/W Description
No.
7 – 0 R/W Reserved
6
RXFIFOFULL
0 R/W RX FIFO is full when trying to store received data.
0: Interrupt disabled
1: Interrupt enabled
5
LLEERR
0 R/W LLE command or parameter error
0: Interrupt disabled
1: Interrupt enabled
4
RXTXABO
0 R/W Receive or transmit operation aborted
0: Interrupt disabled
1: Interrupt enabled
3
RXOVERF
0 R/W Rx FIFO overflow
0: Interrupt disabled
1: Interrupt enabled
2
TXOVERF
0 R/W Tx FIFO overflow
0: Interrupt disabled
1: Interrupt enabled
1
RXUNDERF
0 R/W Rx FIFO underflow
0: Interrupt disabled
1: Interrupt enabled
0
TXUNDERF
0 R/W Tx FIFO underflow
0: Interrupt disabled
1: Interrupt enabled
337
SWRU191C–April 2009–Revised January 2012 CC2541 Proprietary Mode Radio
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated

Texas Instruments CC2541EMK Specifications

General

Brand	Texas Instruments
Model	CC2541EMK
Category	Microcontrollers
Language	English