WWC T1 Set Up & Maintenance Manual Maintenance Modes
Document Ref 905675-001 Rev 2 Page 6-9
Issue B
Display Explanations/comments
c n t r Y Country Code (as defined in initial Set Up).
codE Note : This value is read-only and cannot be changed in this
XX menu.
Press 7 to continue.
Eu ro Euro menu.
Press 9 to toggle between yes (overrule comma position defined in
no
country code) and no.
If selected, the comma position and rounding are set for the Euro:-
- comma position = 2/2/3
- rounding type = 1
Note : Once the dispenser is set to Euros, it is fixed and cannot
be changed again unless a Cold Start is performed.
Press 7 to save and continue.
HLE I
Heavy Lei menu (visible only if Country Code = 40 (Romania)).
Default no is flashing. Press 9 to toggle to yes.
no
Note : Once activated, Heavy Lei cannot be changed without a
Cold Start.
Press 7 to save and continue.
S c A L E Scale menu (as defined in initial Set Up).
Note : This value is read-only and cannot be changed in this menu.
X
Press 7 to continue.
GALLon Gallon menu.
Note : This value is read-only and cannot be changed in this menu.
no
Press 7 to continue.
GALLon Gallon Type menu (only if Gallon is selected).
Note : This value is read-only and cannot be changed in this menu.
X
Press 7 to continue.
d I S P Display Set Up menu.
SE t UP Press 9 to scroll through the available set ups.
50
Note : This value can only be changed in selected applications.
Press 7 to save and continue.
Note : If the Set Up is changed, the calculator will re-start and part
of the initial set up is executed again (refer to section 5.3)