Tokheim WWC T1 - 6.6 Leak Tests

Page 6-8 Document Ref 905675-001 Rev 2
Maintenance Modes WWC T1 Set Up & Maintenance Manual
Issue B
6.6 Leak Tests
Display Explanations/comments
F r L E A French Leak Test menu (only if French Leak Test is activated).
Ac t v tE
Press 7 to save and continue.
E S L E A Esso Leak Test menu (only if the Esso Leak Test is activated).
vXNote : the values are fixed and cannot be changed in this menu.
tX
Press 7 to save and continue.
6.7 Country Code, Euro and Application Set Up
The Country Code and initial set up configuration are defined in the Set Up mode following
a cold start.
In Maintenance mode, the Country Code is read-only i.e. it can be viewed but cannot be
changed without a cold start. With Country Code 040 (Romania) selected, the Heavy Lei
option can be activated ONCE within Maintenance Mode (further changes will require a
Cold Start).
Depending on the application, certain set ups can be modified.
For more information, refer to section 2.5.3.