Tokheim WWC T1 - Product Name from Pick List

WWC T1 Set Up & Maintenance Manual Maintenance Modes
Document Ref 905675-001 Rev 2 Page 6-23
Issue B
6.23.2 PRODUCT NAME FROM PICK LIST
Display Explanations/comments
o U t 1 Product Name from a Pick List.
-
The first - is flashing. Press 3 to scroll through the pick list.
rIn1
Press 3 to select from a pick list.
o U t 1 The first product name SUPEr is flashing.
SUPEr
Press 3 to scroll through the product name pick list to select the
r I n 1 appropriate product name. Press 9 to edit the product name then
press 9 to scroll through the character list. Press 8 to edit next
character.
Press 8 to save and continue.
oUt 1 The lower 1 (internal product number) is flashing.
Press 9 to select next internal product.
rIn
1
Repeat process until the product relations and product names
have been set for all configured internal product codes.
Press 9 to save and continue (when last product is displayed).
c o P Y Copy Right to Left menu.
r t o L This function enables the configuration settings for the right side
no
(side A) of the dispenser to be copied to the left side (side B).
Press 9 to toggle between yes and no.
Press 7 to save and continue.