WWC T1 Set Up & Maintenance Manual Maintenance Modes
Document Ref 905675-001 Rev 2 Page 6-31
Issue B
6.31.2 OCB (OPTION CONTROLLER BOARD) OPTIONS
The parameter values are 0 to 9 for all options:-
OFF option disabled (default)
1 controlled by application (selected applications can overrule the
kernel functionality).
Note : few applications use different functionality than the
standard functionality.
2 to 9 controlled by kernel. Reserved for functions (2 is default kernel
function).
USER INTERFACE
Kernel versions >= 02.00
For IFSF (kernel versions >= 03.04 the menu appears as follows:-
Display Explanations/comments
ocb OCB menu.
This menu sets the values for traffic lights, product lights and
oFF
UPD. Entering the menu is not possible.
Default off is flashing. Press 9 to change this value to:-
1 = Application dependent
2 = Kernel default function
To Next Page
Loading...