Page 9-2 Document Ref 905675-001 Rev 2
Totals WWC T1 Set Up & Maintenance Manual
9 TOTALS
9.1 Reading the Totals (Amount, Volume & Number of Deliveries)
In the Read Totals menu, the total amount, total volume and total number of deliveries per
product are displayed by lifting the relevant nozzle. It is also possible to see the total
volume per volume meter and the total volume per nozzle.
Issue A
(Cont.)
Display Explanations/comments
Read Totals menu.
totAL
Total
is flashing.
Press
7
to enter this menu.
P r o d Product Totals menu.
totAL Press
7
to select another type of total.
Press
0
to return to CONF menu.
Press
8
to enter this menu (read product totals).
S U b Sub Totals menu.
totAL Press
9
to toggle between
yes
(view Sub Totals) and
no
no
(continue with Product Totals menu).
Press
0
to return to Totals menu.
Select
no
and press
7
to continue.
------ All displays show dashes.
------ Lift a nozzle to read the first total for that product.
----
Lift a nozzle.
The Total Amount is displayed (last two digits are decimals).
2380 At the Unit Price line, the
t au
(total amount) and
p 1
tau
(product 1) are flashing.
Replace the nozzle to continue reading the totals.
Press
0
to return to Totals menu.
Lift the same nozzle for a second time.
The Total Volume is displayed (last two digits are decimals).
2 3 8 At the Unit Price line, the
t vo
(total volume) and
p 1
tvo
(product 1) are flashing.
Replace the nozzle to continue reading the totals.
Press
0
to return to Totals menu.
Lift the same nozzle for a third time.
The Total Number of Deliveries is displayed (last two digits are
1 decimals).
tnr
To Next Page
Loading...