Tokheim WWC T1 - Set up Menu

WWC T1 Set Up & Maintenance Manual Set Up Modes
Document Ref 905675-001 Rev 2 Page 5-5
5.3.2 SET UP MENU
The Set Up menu is executed when:-
•A cold start is performed
•Errors are detected with the set up during a warm start or a service start
Issue B
(CONT.)
Explanations/comments
888888
All displays show flashing 8.
888888
The calculator is searching for available electronic peripherals.
8888
cnt rY
Country Code menu.
codE
First implemented country code 0000 is flashing.
0000
Press 9 to scroll through available country codes.
Press 0 to return to country code 0000.
Note : Certain W&M related parameters are predefined within the
country code (refer to the Appendix).
If no country code is selected an error message will be displayed.
Press 7 to save and continue.
EU r o Euro menu.
Default no is flashing. Press 9 to select yes to over-rule the
no
comma positions defined in the country settings.
The comma position and rounding are set for the Euro:-
- comma position = 2/2/3
- rounding type = 1
Press 7 to save and continue.
HLE I
Heavy Lei menu (visible only after Country Code 40 is selected).
Default no is flashing. Press 9 to toggle to yes.
no
Press 7 to save and continue.
ScALE Scaling menu.
Scaling allows the unit price display to be represented by a
0
dfferent unit than the amount i.e. shifts the comma position for the
unit price only.
Enter the value for the number of digits to shift the comma position
to the right. Press 9 to increase the value.
Press 7 to save and continue.
Display