Tokheim WWC T1 - Cent Overshoot Hide Functionality; Q500 T1 Four Position Product Indicator

WWC T1 Set Up & Maintenance Manual Maintenance Modes
Document Ref 905675-001 Rev 2 Page 6-15
Issue B
6.14 Cent Overshoot Hide Functionality
The Cent Overshoot Hide function is read-only and can only be changed in Set Up Mode.
Note : This menu is only available with country code 33 (France).
6.15 Q500T1 Four Position Product Indicator
This function is is read-only and can only be changed in Set Up Mode.
Note : For Q500T1 dispensers only.
Explanations/comments
n n A S Cent Overshoot Hide menu.
t Y P E The masking type id displayed:-
1
1 = xxxx,x0
2 = xxxx,00
Press 7 to continue.
n o F L o Displays the value of the No Flow Timer 0 - 20 (0 to 2 secs):-
t I n n E r Range 0 - 20 (0 to 2 secs):-
05
Note : If No Flow = 0 then the masking functionality is disabled.
Press 7 to continue.
P U L S E Displays the value of P
mask
i.e. no of pulses hidden if masking is set
n n A S 1 pulse = 0.5cl within the range 0 - 5 (0 - 2.5cl).
2
Note : If P
mas k
= 0 then the masking functionality is disabled.
Press 7 to save and continue.
Display
Display Explanations/comments
4 P r o d Q500T1 4 Position Product Indicator menu.
500 T1 Default no is flashing. Press 9 to toggle to yes.
no
Note : Q500T1 Dispensers only.
Press 7 to save and continue.