Groundsmaster 4100--D/4110--D Hydraulic SystemPage 4 -- 141
Lift/Lower Manifold Service (Fig. 102)
WARNING
If lift/lower manifold is attached to machine,
make sure that cutting deck (including wing
decks) is fully lowered before loosening hydrau-
lic lines, cartridge valves or plugs from lift/lower
manifold. If decks are not fully lowered when
manifold components are loosened, decks may
drop unexpectedly.
Forlift/lowermanifoldsolenoidandcontrolvalveservice
procedures, see 4WD Manifold Service in this section.
RefertoFigure102forlift/lowermanifoldcartridgevalve
and plug installation torque.
Hydraulic
System
To Next Page
Loading...
Need help?
General
