Groundsmaster 4100--D/4110--D Page 3 -- 3 Kubota Diesel Engine
General Information
ThisChaptergivesinformationaboutspecificationsand
repair of the diesel engine used in the Groundsmaster
4100--D and 4110--D.
Generalmaintenanceproceduresaredescribedinyour
Operator’sManual.Informationonenginetroubleshoot-
ing,testing,disassemblyandreassemblyisidentifiedin
the Kubota Workshop Manual, Diesel Engine, 03--M--
E3B Series that is included at the end of this section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Kubota Workshop Manual,
Diesel Engine, 03--M--E3B Series. The use of some
specialized test equipment is explained. However, the
cost of the test equipment and thespecialized nature of
somerepairsmaydictatethattheworkbedoneatanen-
gine repair facility.
Service and repair parts for Kubota engines are sup-
plied through your Authorized Toro Distributor. If no
partslistisavailable,bepreparedtoprovideyourdistrib-
utor with the Toro model and serial number of your ma-
chine.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervalsforyourGroundsmastermachine.Refertothat
publicationforadditionalinformationwhenservicingthe
machine.
Stopping the Engine
IMPORTANT: Before stopping the engine after
mowing or full load operation, cool the turbo-char-
ger by allowing the engine to run at low idle speed
for five (5) minutes. Failure to do so may lead to tur-
bo-charger trouble.
Kubota
Diesel Engine
To Next Page
Loading...
Need help?
General
