EasyManuals Logo

Toro 30413 Service Manual

Toro 30413
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #260 background imageLoading...
Page #260 background image
Groundsmaster 4100--D/4110--DPage 6 -- 26Axles, Planetaries and Brakes
9. Remove the bevel gear case/axle case assembly
from the axle support. Coat a new O-ring with grease
andtemporarilyinstalltheaxlecoverassembly.Position
a dial indicator at the tooths center. Prevent the axle
from turning and measure the lower bevel gear to axle
gear backlash (Fig. 26).
LOWER BEVEL GEAR BACKLASH:
0.004 to 0.016 in. (0.10 to 0.40 mm)
10.Adjustbacklashbyincreasingorreducingaxlebear-
ingshimthickness(seeAxleShaftsinthissectionofthis
manual).
NOTE: Axle bearing shims are available in 0.008 in.
(0.2 mm), 0.012 in. (0.3 mm) and 0.020 in. (0.5 mm)
thickness.
11.Torque axle cover screws from 17 to 20 ft-lb (23 to
27 N--m).
12.Coat a new O-ring with grease and install the bevel
gear case/axle c ase assembly on the axle support.
Torquemountingscrewsandnutsfrom35to41ft-lb(47
to 56 N--m) (Fig. 17).

Table of Contents

Other manuals for Toro 30413

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro 30413 and is the answer not in the manual?

Toro 30413 Specifications

General IconGeneral
BrandToro
Model30413
CategoryLawn Mower
LanguageEnglish

Related product manuals