e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 34
3.2.4 Gamma balance adjustment
The density adjustment at the Black Mode is performed by selecting its density area from the following:
low density, medium density and high density.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustments according to the following procedure.
Be sure that this adjustment is made after performing  P.3-29 "3.2.1 Automatic gamma
adjustment".
<Procedure>
The procedure is the same as that of  P.3-32 "3.2.3 Color balance adjustment".
Color
mode
Original mode
Item to be
adjusted
Remarks
Text/
Photo
Text Photo
Gray
scale
ACS/
Black/
Text/
Photo
ACS/
Black/
Text
ACS/
Black/
Photo
User
custo
m
Black 590-0 591-0 592-0 7956-0 7957-0 7958-0 7959-0 949-0 Low density The larger the
value is, the
density of the item
to be adjusted
becomes darker.
Acceptable values:
0 to 255 (Default:
128)
590-1 591-1 592-1 7956-1 7957-1 7958-1 7959-1 949-1 Medium
density
590-2 591-2 592-2 7956-2 7957-2 7958-2 7959-2 949-2 High
density
To Next Page
Loading...
Need help?
General
