Toshiba e-STUDIO2020C User Manual

8
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
8 - 1
8. FIRMWARE UPDATING
When you want to update the firmware to the latest one or the equipment becomes inoperable due to
some defect in the firmware, updating can be performed as follows.
Equipment
Options
* The harness jig for board connection (HRNS-CNV-DL-JIG) is necessary.
Firmware Updating method
Master data
(HDD program data, System firmware, UI data)
USB media
System ROM
(OS data)
USB media
Download jig
(PWA-DWNLD-350-JIG2)
Engine ROM
(Main firmware)
USB media
Download jig
(PWA-DWNLD-350-JIG2)
Scanner ROM
(Scanner firmware)
USB media
Download jig
(K-PWA-DLM-320)
Model name Firmware Updating method
Reversing Automatic Document
Feeder (RADF)
(MR-3018)
RADF firmware
Download jig
(K-PWA-DLM-320)
Finisher
(MJ-1101)
Finisher firmware
Converter firmware
*
Saddle Stitch Finisher
(MJ-1030)
Finisher firmware
Saddle stitcher firmware
Hanging Finisher
(MJ-1031)
Finisher firmware
Hole Punch Unit
(MJ-6101)
Hole punch unit firmware
Fax Unit
(GD-1250)
FAX firmware
Imaging Acceleration Board
(GE-1170)
Imaging Acceleration Board firmware USB media

Toshiba e-STUDIO2020C Specifications

General

Brand	Toshiba
Model	e-STUDIO2020C
Category	All in One Printer
Language	English