3
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3 - 57
3.4.5 Sharpness adjustment
If you want to make scan images look softer or sharper, perform the following adjustment. The
adjustment can be made for each of the color modes and original modes independently.
<Adjustment Mode (05)>
You have to make adjustment by balancing between moire and sharpness.
<Procedure>
The procedure is the same as that of  P.3-55 "3.4.2 Density adjustment".
Code Color mode Original mode Contents
1086 Full Color Text • The larger the value is, the sharper the image becomes;
while the smaller the value is, the softer the image becomes.
• The smaller the value is, the less moire tends to appear.
• The acceptable values are 0 to 255.
The center value is 128.
1087 Printed Image
1088 Photo
8375 User custom
840 Black Text/Photo
841 Text
842 Photo
7470 User custom
843 Gray Scale -
To Next Page
Loading...
Need help?
General
