Toshiba e-STUDIO2020C User Manual

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 56
8.4 Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm that the data
were overwritten properly.
Firmware Code Remarks
Updating HDD/UI data 08-944 HDD Version
08-924 Version of UI data language 1 in HDD
Updating System ROM 08-900 System firmware ROM version
08-921 System firmware ROM internal program version
Updating OS 08-920 FROM basic section software version
Updating Engine ROM 08-903 Engine ROM version
Updating Scanner ROM 08-905 Scanner ROM version
Updating RADF ROM 08-907 RADF ROM version
Updating Finisher ROM 08-908 Finisher ROM version
08-911 Hole punch unit ROM version (MJ-6101 only)
08-9945 Converter board ROM version
Updating FAX ROM 08-915 FAX ROM version
Imaging Acceleration Board
ROM
08-9965 Imaging Acceleration Board SROM version

Toshiba e-STUDIO2020C Specifications

General

Brand	Toshiba
Model	e-STUDIO2020C
Category	All in One Printer
Language	English