2
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
SELF-DIAGNOSTIC MODE
2 - 11
*1
• Be sure to install the USB storage device to the equipment and check if the device can be used with
this code.
• Be sure to turn OFF the write protection (the function to prevent data from erasure by the accidental
recording or deleting) of the USB storage device before performing the check, otherwise this code
cannot be used.
• It may take some time (2 sec. to 10 sec.) before this check is completed depending on the USB
storage device.
[0]
A- --
B- --
C- --
D Security enabler Connectable Not connectable
E Judgement for acceptable USB storage device
(*1)
Acceptable Not acceptable
F- --
G- --
H- --
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
To Next Page
Loading...
Need help?
General
