© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD
3
Ver.10
Ver.10 <2010.11.16>
Page Contents
2-2 (9S-)111, 211, 213 and 214 have been added.
2-3 (9S-)211, 213 and 214 have been added.
2-12 (03-)114 and 164 have been added.
2-16 (9S-)211, 213 and 214 have been added.
2-19 “Note” has been added to “2.4 List Printing”.
2-26 A description of the error logs has been added.
2-27 A description of the total counter list has been added.
2-74 08-9985 and 9986 have been added.
2-75 08-8598, 8591 and 9987 have been added.
2-79 08-3789, 8584, 8585, 8586, 8587, 8588, 8590, 8605, 8606 and 9791 have been added.
2-80 08-8589 has been added.
2-81 08-8594 has been added.
2-84 08-3625, 8595, 8597 and 8601 have been added.
2-85 08-8596, 8599, 8600, 8602, 8603, 8604, 8823 and 9984 have been added.
3-4 “3.1.3 Performing Image Quality Control” has been changed.
4-1 “4.1.2 Precautions” has been changed.
4-3 “4.1.4 List of codes available for cloning” has been added.
4-5 The note of “4.1.5 Cloning procedure” has been changed.
4-8 The note of “4.1.5 Cloning procedure” has been changed.
4-12 “4.2.2 Precautions” has been changed.
5-8 A note has been added to “5.4.3 Operational screen”.
5-44 “FLOIL” has been added to “5.10 Grease List”.
6-12 “F140” has been added to “6.1.2 Service call”.
6-23 “<<Error history>>” described in the chapter 6.1.4 has been moved to the chapter 6.1.6.
(Configuration change of the contents.)
6-106 “F140” has been added to “6.2.22 Other service call”.
7-17 “Note” has been added to “7.2.2 HDD fault diagnosis”.
8-4 “Note” has been added to “8. FIRMWARE UPDATING”.
9-5 “9.5 Fuse” has been changed.
To Next Page
Loading...
Need help?
General
