Installing Tracer Summit using Windows NT
BMTW-SVN01F-EN 191
Installing Tracer Summit using
Windows NT
You must have Internet Explorer Version 5 or higher installed on your
PC before installing Tracer Summit.
To install the Tracer Summit software:
1. Close all applications and toolbars. To verify that all tasks are closed,
press Ctrl-Alt-Delete and end all the tasks except for Explorer.
2. Insert the Tracer Summit for Windows CD in the CD-ROM drive of
your PC. Tracer Summit automatically displays the Tracer Summit
Installation screen (see Figure 89).
Figure 89. Tracer Summit Installation Screen
3. Click on the Tracer Summit Setup Program button.
4. Follow the online instructions to install the application. The installa-
tion process takes 5 to 10 minutes, depending on the speed of the PC
and the amount of available memory.
Setting UP Network Adapters
Follow the manufacturer’s instructions for installing an Ethernet LAN
adapter. When installation is complete, install the network adapter pro-
tocol, and then verify the adapter status.
Installing the Network Adapter Protocol
IMPORTANT
The network adapter card must be installed before installing the net-
work adapter protocol.
The network adapter protocol is the language the computer uses to com-
municate over the network. How you install the network adapter protocol
To Next Page
Loading...
Need help?
General
