Unify OpenStage 40 SIP

88 Enhanced phone functions
Setting the hold reminder time
Use the "Hold reminder" function to set the length of the timeout before an auto-
matic reminder is issued about a held call.
The minimum value is 3, that is, the reminder is output after three minutes. The
maximum value is 15 minutes.
z
You can also configure this setting via the WBM interface  Page 206.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter a value between 3 and 15 and confirm.
Select and confirm the option shown.
Settings
User
Configuration
Connected calls?
Hold rem. delay
Save & Exit