Unipulse F371 User Manual

4.CALIBRATION
23
4-6. Digital Offset
By using the digital offset function, the value obtained by subtracting the set value from
the indicated value is displayed.
This function is convenient when zero cannot be obtained with no load for some reason
or for offsetting.
(displayed value)=(actual indicated value)-(offset value)
How to set
1）Press the MODE button.
2）Press the CALIBRATION button.
3）Press the PAGE button to select the page and press the Digital Offset button.
4）Enter the digital offset value by the numerical keys and determine with the OK button.
－ 99999 - 99999
Setting range:
Setting call Page 2
→→
Calibration

Unipulse F371 Specifications

General

Brand	Unipulse
Model	F371
Category	Accessories
Language	English