3. Press the left arrow button in the menu 3 to enter the changing units view.
I
imperial
US gal
F
UK gal
C
0
metric
SET
GUID-F80177B0-D398-4F2E-B3B1-62D55377F293
4. Move the navigation box to the position of the unit you are going to change
with the up and down arrow buttons.
5. Select the unit with the left and right arrow buttons.
When the unit of length is changed between metric and imperial, the following
units also change:
Unit
Metric Imperial
Driving speed km/h mph
Distance km, m miles, yard
Surface, area ha acre
Implement width cm inch
NOTE: You can adjust the display theme with the arrow buttons when in large
drive view or split drive view.
With a short press of the ESC button you can return to the menu 3. A long press
of the ESC button returns to the previously active drive display.
3. Operation
- 201 -
To Next Page
Loading...
